Future of modifieds

[openwm53]

EZ

You would have to raise the ride height of the chassis by 1/2" due to ground clearance rules. We already thought of that. LOL !

Also, a good fabricator could lower the stock clip pick-up points between the framerails if he wanted to put forth the effort, but then again there are ground clearance rules.

I have never been the sharpest knife in the drawer but if you moved your ride heights back to 4 wouldnt it simply change the angle of the lower ? Or is what your saying that the cross member will still rise and your moment center move?

[UREZ2PASS]

I have never been the sharpest knife in the drawer but if you moved your ride heights back to 4 wouldnt it simply change the angle of the lower ? Or is what your saying that the cross member will still rise and your moment center move?

I'll keep it simple. The same geometry from slotted lower fab clip can be accomplished with a stock clip, it takes some work but it can be done. Is it legal ? No, but very few have been caught in the tech shed.

Did you know some stock clips have been acid dipped to reduce weight ?

A fab clip makes all the cheating with a stock clip a waste of time and money.

[openwm53]

Lol

I like simple..........but you didnt answer my question.

[UREZ2PASS]

I have never been the sharpest knife in the drawer but if you moved your ride heights back to 4 wouldnt it simply change the angle of the lower ? Or is what your saying that the cross member will still rise and your moment center move?

Yes, ride height changes lower control arm angle and everything else.

Lowering the crossmember in the frame would be a way to lower the pick-up points without easily being detected. It's blatant cheating if caught.

[openwm53]

Rules

The rules are now posted for A-dale
Desoto
Showtime and NSS. They all have slight differences. I will post them all later

[chassisdude]

Doug, we just went through all the changing to get roll centers close, if you want right me and we can chat. We have a chevelle clip and got some good numbers Carick116@aol.com Rick

[openwm53]

Chassis

Absolutely you will be hearing from me.