Which a-arms to use

[chassisdude]

I'm trying to find out what a-arms they used to widen the front track width of a 69-70 chevelle chassis. One guy thought it was a Ford but wasn't sure. I can't modify chassis mounts, so would have to be close to fit into stock chevelle bottom control arm mounts. Trying to get away from crazy 1 inch off set wheels. Any info would be greatly appreciated. I will check here or if yiou would e-mail me at carick116@aol.com Rick

[oldgold]

I'm trying to find out what a-arms they used to widen the front track width of a 69-70 chevelle chassis. One guy thought it was a Ford but wasn't sure. I can't modify chassis mounts, so would have to be close to fit into stock chevelle bottom control arm mounts. Trying to get away from crazy 1 inch off set wheels. Any info would be greatly appreciated. I will check here or if yiou would e-mail me at carick116@aol.com Rick

crown victoria lowers are about 1.5 inch longer

[chassisdude]

Still would love to widen front track width on my 69 chevelle clip modified. Will those crown vic or any other bottom a arm fit the chevelle chassis that are longer than the stock bottom a arm? Just would love to get away from those crazy off set wheels. Rear axle tubes and axles would be no problem but I don't know if there are any a arms that would bolt into the front chevelle clip??????

[modlmrcr]

Call don hellyer he has been all over the country and been building cars over fifty years. Woody would probably know too . Lost phone and all contacts or would give numbers for you.

[Darrell 76]

numbers

Don Hellyer ----386--427-8024
Woody (Bemco fab )----386--801-3026