Tweet
Warrior Late Model Chassis.Pinto front spindles,8" Ford disc brake rear w/300 gear.All steering comp and hiems and swivels on car are new.Already setup for 2.3 ford motor and trans.8 gal. fuel cell,New alum.fuel line.coil over all 4 wheels.New right rear shock.Set up with right springs for Eastbay.
40 over stock rod motor,new everything in motor.Needs gaskets to finish putting together.D-Port closed chamber head,2pc. rockers,adj. valves.Old late model body but very usable.
Here is is goodies.............................
(3)5.7 30 pistons with rods.
(3)5.83 30 over pistons with rods.
(14)spare 2 pc. rocker arms
New crower valve springs,retainers,locks.
(10) Different intakes
(4)EFI Esslinger EFI carb. adapters.1/2",1",1 1/2",2".
(4) Stock oil pans.
(3) good 2.14 trans and 2 bad ones for parts.
342 and 279 8" complete chunks.
new 332 and 293 8" ring and pinion.
2 sets head stud kits,main strap kit.
Number on different valve covers
Spare Pinto spindles and rotors.
spare D-Port head w/lifter bosses cut down
Stock bore 2.3 block
Canton 2.3 Pinto front sump racing oil pan.
(2) 8" rear end housings.
15 lbs flywheel w/7 1/2 in 3 puck disc.
510,(2)535,574 and 1 w/no# racing cams.
(2)Cam degree wheels,2 Esslinger power crank pulleys.
Number of water pumps,clutch and PP,fuel pumps.
Really to much to list.Over $3000 in used parts.
Bring a pickup...lots of parts.
Will take $3000 for everything I have for outlaw 4 or trade for V8 Warrior/Thunder stock or nice Street Stock roller.
40 over stock rod motor,new everything in motor.Needs gaskets to finish putting together.D-Port closed chamber head,2pc. rockers,adj. valves.Old late model body but very usable.
Here is is goodies.............................
(3)5.7 30 pistons with rods.
(3)5.83 30 over pistons with rods.
(14)spare 2 pc. rocker arms
New crower valve springs,retainers,locks.
(10) Different intakes
(4)EFI Esslinger EFI carb. adapters.1/2",1",1 1/2",2".
(4) Stock oil pans.
(3) good 2.14 trans and 2 bad ones for parts.
342 and 279 8" complete chunks.
new 332 and 293 8" ring and pinion.
2 sets head stud kits,main strap kit.
Number on different valve covers
Spare Pinto spindles and rotors.
spare D-Port head w/lifter bosses cut down
Stock bore 2.3 block
Canton 2.3 Pinto front sump racing oil pan.
(2) 8" rear end housings.
15 lbs flywheel w/7 1/2 in 3 puck disc.
510,(2)535,574 and 1 w/no# racing cams.
(2)Cam degree wheels,2 Esslinger power crank pulleys.
Number of water pumps,clutch and PP,fuel pumps.
Really to much to list.Over $3000 in used parts.
Bring a pickup...lots of parts.
Will take $3000 for everything I have for outlaw 4 or trade for V8 Warrior/Thunder stock or nice Street Stock roller.
Attached Files
Comment